A Practical Guide to Glycol Chiller Systems: Design, Control and Installation Explained

Understanding Glycol Chiller Systems

Across the UK, glycol chiller systems support industries that rely on accurate temperature regulation. From food and beverage production to pharmaceutical manufacturing and industrial processing, these systems provide consistent cooling performance using a solution of glycol blended with water to transfer heat.

Unlike standard water chillers, glycol chillers use a glycol-based solution that lowers the freezing point of the circulating fluid. This makes them suitable for applications operating below 0°C or installations with outdoor pipework exposed to cold weather.

At a fundamental level, glycol chiller systems remove heat from a process and transfer it away through a refrigeration circuit. The cooled glycol solution is then pumped through pipework to absorb heat from equipment or products before returning to the chiller.

How a Glycol Chiller System Works

Effective system design ensures consistent output and reduced energy consumption. Core components typically include:

• Compressor


• Condenser


• Evaporator


• Metering device


• Integrated buffer tank and circulation pump


• Electrical control system

Within the evaporator, the refrigeration cycle extracts thermal energy from the secondary fluid. The chilled solution is then sent to the process load, absorbs heat, and flows back to the unit.

A typical glycol chiller system diagram shows two distinct circuits. The refrigeration loop manages heat removal, while the glycol loop delivers cooling to the equipment or product. Accurate schematics are valuable for installation, servicing and fault finding.

The Control Panel: Managing Performance and Safety

The glycol chiller system control panel acts as the central interface for monitoring and adjustment. Modern panels typically include:

• Digital temperature controllers


• PLC or microprocessor interfaces


• Pressure protection cut-outs


• Circulation pump management


• Alarm notifications


• BMS or remote access integration

The control panel manages compressor cycling, supervises operating conditions and ensures safety limits are maintained. Many systems also log performance data to support preventative maintenance and compliance documentation.

In facilities requiring precise cooling, reliable control prevents temperature drift that could affect product quality or equipment integrity.

Installing a Glycol Chiller System Control Panel

Proper glycol chiller system control panel installation is essential for consistent performance and regulatory compliance. Key factors include:

• Electrical integration – The panel should be installed in accordance with UK standards, with correct breaker sizing and safe isolation points.


• Location and ventilation – Panels should be located in dry, well-ventilated areas away from excessive heat, vibration or moisture.


• System validation – Qualified engineers should verify sensor calibration, test alarms and confirm pressure switch operation.

Commissioning ensures the unit operates in line with the original glycol chiller system design specifications.

Design Considerations for Glycol Chiller Systems

Effective glycol chiller system design begins with detailed analysis of process requirements. Engineers evaluate:

• Required temperature range


• Hydraulic design and circulation requirements


• External temperature influences


• Redundancy or backup requirements


• Allowance for capacity growth

Oversized systems increase energy consumption, while undersized units struggle to maintain setpoints. Load calculations must consider maximum usage scenarios and continuous duty patterns.

Fluid selection also plays a role. Propylene glycol is commonly used in food and beverage settings due to its lower toxicity, whereas ethylene glycol can be chosen for applications prioritising thermal performance.

Additional considerations such as pipe insulation, pump specification and heat exchanger configuration influence stability, efficiency and lifespan.

Where Glycol Cooling Is Used

Glycol chiller systems support numerous sectors across the UK, including:

• Breweries and distilleries


• Dairy and food processing facilities


• Medical and laboratory facilities


• Laser and medical equipment cooling


• Plastics processing and injection moulding


• Refrigerated storage applications

For example, in beverage production, chillers maintain fermentation temperatures and cool storage tanks. In manufacturing settings, they prevent overheating during continuous machinery operation.

Protecting System Performance

Routine maintenance supports consistent output and equipment longevity. Typical servicing tasks include:

• Checking glycol concentration levels


• Inspecting pumps and seals


• Removing debris from heat rejection surfaces


• Reviewing operational parameters


• Confirming correct refrigeration performance

Over time, glycol can degrade or become contaminated, reducing heat transfer efficiency. Regular testing helps maintain optimal performance.

When correctly designed, installed and maintained, glycol chiller systems can provide reliable service for many years.

Frequently Asked Questions

What is the typical glycol percentage?

The required percentage depends on freeze protection and operating temperature, commonly ranging from 20–40%.

Can a glycol chiller be installed outdoors?

Yes, provided the unit is rated for outdoor use and protected against environmental exposure.

How does a glycol chiller differ from a water chiller?

Unlike water-only systems, glycol-based chillers resist freezing and support sub-zero applications.

Is remote access available?

Advanced control panels often provide remote monitoring and data logging functionality.

What is the recommended testing frequency?

Fluid condition should be reviewed regularly based on system workload.

Where are they most commonly used?

Industries requiring stable and low-temperature control frequently depend on glycol-based systems.

Final Considerations

Glycol chiller systems deliver dependable cooling performance across a broad range of industrial and commercial applications. From accurate load calculation and correct commissioning through to routine servicing, every stage affects efficiency and longevity.

Whether planning a new installation or upgrading existing equipment, engaging knowledgeable engineers helps align system capacity with process needs. For technical advice and tailored solutions, visit the relevant specialists at the Newsome glycol chillers page to review professionally engineered systems.